Every tolerance. Verified.
Qopikun Labs measures exactly what your drawing calls for: position, profile, flatness, runout and every datum in between. You get CMM-backed reports that your customer and your auditor can both rely on.
- Feature
- Hole 1 / 6
- Nominal X, Y
- 0.000, 60.000
- Actual X, Y
- 0.000, 60.000
- Deviation ⌀
- 0.000
A part can pass every size check and still fail at assembly.
Size alone does not tell you whether a part will fit, seal or run true. GD&T controls form, orientation, location and runout against datums, and that is what decides function. We read your drawing the way the designer intended and measure it that way.
See the full serviceCatch it before assembly
Find geometric non-conformances while the lot is still on your floor, not after it reaches the line or the field.
Settle supplier disputes
Independent, datum-correct measurement ends the argument about whose CMM data is right.
Pass audits with confidence
Traceable reports ready for first article, customer source inspection and AS9100 audits.
Every symbol on your drawing, measured.
Hover a symbol to see what we verify. Form, profile, orientation, location and runout, per ASME Y14.5 and ISO 1101.
From drawing to signed report in five steps.
Share
Send the drawing, 3D model if you have one, quantity and required date.
Review
We study the datums and callouts, then confirm scope, price and timeline.
Set up
Fixturing and CMM program built to your datum reference frame.
Measure
Parts inspected in our lab or at your facility, characteristic by characteristic.
Report
Ballooned drawing and results delivered, with a walkthrough of any rejects.
Held to the standards our customers work to.
Have a drawing that needs verifying?
Send it across. We'll come back with scope, price and timeline within one working day.
Advanced GD&T Inspection
Precision dimensional measurement and geometric tolerance verification for manufacturers who cannot afford to guess. One service, done properly.
We verify that every geometric tolerance on your drawing is met, measured from the datums your designer chose.
Most measurement errors in GD&T come from interpretation, not equipment: the wrong datum setup, a missed modifier, a profile evaluated without its datum reference. Our inspectors check the drawing first and program the CMM second, so the numbers mean what the drawing says.
Included with every job
- Drawing and datum scheme review before measurement
- CMM program built to your datum reference frame
- All 14 geometric characteristics, plus size and basic dimensions
- MMC / LMC bonus tolerance and datum shift calculated
- Ballooned drawing with characteristic-wise results
- NDA-first handling of your drawings and models
What we inspect
Grouped the way the standard groups them. Hover any characteristic.
Modifiers and datum conditions handled correctly.
The tolerance value is only half the callout. These are where most inspection reports go wrong.
We work to your drawing's standard.
What you receive
- Ballooned drawingEvery characteristic numbered and traceable to the results table.
- Results tableNominal, tolerance, actual, deviation and accept/reject for each balloon.
- CAD deviation colour mapsPart-to-model comparison for profile and freeform surfaces.
- Calibration traceabilityEquipment and calibration details recorded on every report.
| # | Callout | Tol. | Actual | Result |
|---|---|---|---|---|
| 1 | 0.02 | 0.020 | 0.011 | PASS |
| 2 | ⌀0.03A | 0.030 | 0.017 | PASS |
| 3 | ⌀0.10 MABC | 0.100 +0.012 | 0.046 | PASS |
| 4 | 0.04AB | 0.040 | 0.022 | PASS |
| 5 | 0.05ABC | 0.050 | 0.031 | PASS |
In our lab, or on your shop floor.
Send parts to Peenya
Parts are inspected in a controlled environment at our Peenya Industrial Estate facility, Bengaluru.
- Best for first articles and disputed lots
- Temperature-controlled measurement
- Parts returned with report
We come to you
Our inspectors work on your CMM, at your facility, to your schedule.
- Best for large or production-critical parts
- No part movement or transit risk
- Pan-India coverage
Built for tight-tolerance work.
Questions we get asked
Ready when your drawing is.
Share the drawing and quantity. We'll confirm scope, price and timeline within one working day.
One discipline. Measured properly.
Qopikun Labs is the dedicated GD&T inspection company of the Qopikun group, built on years of third-party inspection for aerospace and defence manufacturers.
We started on the shop floor, inspecting parts for some of the most demanding customers in aerospace.
The Qopikun group has provided third-party inspection, CMM metrology and quality systems support from Peenya, Bengaluru since 2017. Over that time one pattern kept repeating: the hardest problems were rarely about the measuring machine. They were about reading the drawing correctly.
Qopikun Labs was set up to do one thing, advanced GD&T inspection, and to do it with the depth that aerospace, defence and precision manufacturing need.
- 2017
Qopikun founded
Third-party inspection and CMM metrology from Peenya Industrial Estate.
- Growth
Aerospace & defence focus
Inspection and QMS work for domestic and international OEMs and their supply chains.
- Certified
AS9100D · ISO 9001 · ISO/IEC 17020
Quality management and inspection-body standards in place.
- Today
Qopikun Labs
A company focused entirely on advanced GD&T inspection.
Four principles behind every report.
Datum-true
We set up parts exactly as the datum reference frame specifies, never as is convenient.
Traceable
Calibrated equipment and recorded setups, so any result can be traced and repeated.
Confidential
NDA before files. Drawings and models seen only by the team on your job.
Clear
Reports your customer and your production team can both read and act on.
Recognised quality systems.
Three Qopikun Labs units
Three units across Karnataka and Tamil Nadu, close to the aerospace and precision engineering supply base. On-site inspection available across India.
Visit or contact usSend us the drawing. We'll do the rest.
Tell us about the part and we'll reply with scope, price and timeline within one working day.
Address · Unit 1
Qopikun Labs Pvt. Ltd.
Peenya Industrial Estate
Bengaluru, Karnataka, India
Address · Unit 2
Qopikun Labs Pvt. Ltd.
Bengaluru Rural
Karnataka, India
Address · Unit 3
Qopikun Labs Pvt. Ltd.
Coimbatore
Tamil Nadu, India
Working hours
Monday to Saturday
9:00 AM to 6:00 PM IST
Certified
AS9100D · ISO 9001:2015 · ISO/IEC 17020